Painting exterior walls can lead to the best outcomes when the right steps are followed. Individuals who love to maintain their home and get the job done by themselves will surely enjoy painting exterior walls. They’ll experience a great day scraping, sanding and preparing the walls before they will climb ladders and mix paint. Here is the step by step process in painting exterior walls.

Scrape the Walls

The exterior walls to purchase chipping old paint should be scraped so the peeling paint will be removed. Seal the crevices and cracks with spackling compound or painter’s caulk. Then, sand the walls using 100-grit sandpaper and soon you should be able to achieve smoothness on the wood.

Use Mild Soap and Water to Wash the House

You can make usage of a pressure sprayer in washing the house; however, you need to be sure that you don’t dig grooves into your wood. Rinse off the soap and invite the wood to dry totally.

Apply Primer Coats

You can apply as much primer coasts as you necessary using a wide brush. It is advisable to follow the instructions given by the manufacturer.

Apply the Pain

In applying the paint, you will need to start from the very best down starting at your fascia boards and eaves. The complete fascia and eaves perimeter should be painted before you begin on your walls.

Start the Wall Painting

Begin with a wall area from the top with the usage of long horizontal strokes with your brush. Begin in an area which doesn’t have paint onto it and apply the paint toward the region that you just painted. This process should be repeated until you have applied the first coat. Always follow the instructions of the maker on another coats.

In painting 外壁塗装 , it’s important to wear safety glasses on a regular basis. You may also wear something to safeguard your lungs once you sand the walls. Allow spackling compound or painter’s caulk dry totally before you begin sanding. This will make sure that there will be a great covering around your trim. If you have poured paint into a bucket, make sure that the paint’s lid can be sealed tightly. It is possible to drive a 6d finish nail and make holes round the paint’s rim will assure proper seating of the lid that may preserve your paint in the end. Finally, it is not a good idea to stroke until your brush will be out of paint because this can result in uneven coats.